iFlight Blitz Mini F7 Flight Stack (20×20 F7 + 55A 4in1 ESC)

40,000.00

The Blitz F7 20×20 stack is the same as used on the Nazgul Evoque, it features the Blitz F7 flight controller coupled to the Blitz E55 55A 4in1 ESC that runs Blheli_32.

Iflight Blitz Mini F7

The next generation of Flight controllers and ESC’s from iFlight have arrived. iflight blitz mini f7 is currently being used in their BNF quads such as the Evoque BNF. These new flight controllers are equipped with a plug and play connectors making connecting your  video transmitter, radio receiver, and other periphery sensors a breeze. They also make diagnosing issues in the field much easier with status indicator LED’s that let you know in seconds if you are having a problem with the 3.3V, 5V, or VBat. Coupled with IFlight’s new 55 Amp BLHeli 32 Blitz 4-in-1 ESC, this stack can handle even the most amp hungry motors.

TOP FEATURES:

  • Improved circuit design, better components and lower electrical noise!
  • DJI HD VTX connector (plug-and-play / no soldering required)
  • FC indicator LEDs for visual debugging

Blitz Mini F7 FC SPECIFICATIONS:

  • MCU:   STM32 F722
  • GYRO:   MPU6000 or BMI270
  • BAROMETER:   NO
  • OSD CHIP:   AT7456
  • FLASH:   16MB (BLACKBOX FLASH)
  • UARTS:   6
  • MOTOR OUTPUTS:   4X (SH1.0 CONNECTOR)
  • I2C SERIAL:   SDA / SLA PADS
  • SMARTAUDIO / IRC TRAMP VTX PROTOCOL SUPPORTED
  • LED CONTROLLER:   YES
  • BEEPER PAD:   YES
  • FIRMWARE TARGET:   IFRC-IFLIGHT_BLITZ_F722
  • MOUNT PATTERN:   20X20 MM / 4MM PCB HOLE DIAMETER, SILICON GROMMETS FOR M3 SCREWS
  • DIMENSIONS:   30.5X27 MM
  • WEIGHT:   5G

WIRING SUGGESTION:

  • UART 1 FOR VTX HD / ANALOG
  • UART 2 FOR A RECEIVER
  • UART 3/4/5 FOR GPS OR OTHER SENSORS THAT REQUIRE A SERIAL PORT
  • UART 6 FOR ESC TELEMETRY

 TIPS

  • F722 MCU HAS AN INNER INVERTER.
  • SBUS, CRSF, ELRS, IBUS, DSM ETC… CAN BE CONNECTED TO ANY UNUSED UART_RX, WE SUGGEST YOU CONNECT TO UART_RX2
  • FRSKY SMARTPORT, TRAMP & SMARTAUDIO CAN BE CONNECTED TO ANY UNUSED UART_TX, WE SUGGEST YOU CONNECT TO UART_TX1
  • F.PORT CAN BE CONNECTED TO ANY UNUSED UART_TX, WE SUGGEST YOU CONNECT TO UART_TX2

ESC // BLITZ Mini E55 4-IN-1 2-6S ESC

55A ESC SPECIFICATIONS:

  • DIMENSION: 35*42MM
  • MOUNTING HOLES: 20*20MM/Φ4MM
  • WEIGHT: 11.3G
  • SUPPORTS 2-6S LIPO INPUT
  • MCU: G071
  • CONSTANT: 55 AMPS 
  • BURST: 60 AMPS
  • CURRENT SENSOR: YES
  • BEC: NO
  • CURRENT RATE: 100
  • SUPPORTS: DSHOT DSHOT150/300/600/MULTISHOT/ ONESHOT ETC.
  • FIRMWARE: BLHELI 32
  • TARGET:   IFLIGHT_BLITZ_G1

Package Includes:

  • 1pc x BLITZ Mini F7 Flight Controller 
  • 1pc x BLITZ Mini E55 4-IN-1 2-6S ESC 
  • 1set x silicon grommets 
  • 1set x wire harness for F7 Flight controller

 

Wiring Diagram ( Click the Image to open in Full Size )

 

Reviews

There are no reviews yet.

Be the first to review “iFlight Blitz Mini F7 Flight Stack (20×20 F7 + 55A 4in1 ESC)”

Your email address will not be published. Required fields are marked *